Hotline:
+88 01975-335688 (Immigration)
+88 01761-806527 (Chittagong)

One stop platform for preparatory Course and foreign Education and Immigration.

What is IELTS?

The International English Language Testing System (IELTS) assesses the English language proficiency of people who want to study or work where English is used as the language of communication. IELTS tests are held in over 1,000 locations across the world with tests up to three times a month.

Why choose IELTS?

IELTS scores are accepted by over 9,000 organisations worldwide, including universities, employers, immigration authorities and professional bodies.

IELTS is designed by experts to fairly assess the language ability of candidates who want to study or work where English is the language of communication.

Test format

What's in the IELTS Listening test?

The test has four sections, with ten questions in each section. The questions are in the same order as the information in the recording, so the answer to the first question will be before the answer to the second question, and so on.

Sections 1 and 2 deal with everyday, social situations. There is a conversation between two speakers in Section 1 (for example, a conversation about travel arrangements). Only one person speaks in Section 2 (for example, a speech about local facilities).

Sections 3 and 4 deal with educational and training situations. In Section 3 there is a conversation between two main speakers (for example, two university students in discussion, perhaps guided by a tutor). In Section 4 only one person speaks on an academic subject.

You will hear the recordings once only. Different accents, including British, Australian, New Zealand and North American, are used.

You will need to transfer your answers to an answer sheet. You will have 10 minutes at the end of the test to do this. You should be careful when writing your answers on the answer sheet because you will lose marks for incorrect spelling and grammar.

Summary

Time allowed: Approximately 30 minutes (plus 10 minutes to transfer your answers to an answer sheet)
Number of sections: 4
Number of questions: 40
Marking: Each correct answer receives 1 mark.

Types of question

Question Type 1 – Multiple choice

What's involved? This type of question may be a question with three possible answers or the first half of a sentence with three possible sentence endings. You have to choose one correct answer, A, B or C, then write the correct letter on the answer sheet.

Sometimes you are given a longer list of possible answers and you have to choose more than one answer. You should read the question carefully to check how many answers you need to choose.

Question Type 2 – Matching

What's involved? In this type of question, you have to match a list of items from the recording to a list of options on the question paper, then write the correct letter on the answer sheet.

Question Type 3 – Plan/map/diagram labelling

What's involved? In this type of question, you have to complete labels on a visual which may be:
  • - a diagram (e.g. a piece of equipment)
  • - a set of pictures
  • - a plan (e.g. of a building)
  • - a map (e.g. of part of a town).
You may have to:
  • - select your answers from a list on the question paper, then write the correct letter on the answer sheet
  • - select words from the recording which fit into gaps on the question paper. In this case, you will need to keep to the word limit given in the instructions. You do not have to change the words in the recording in any way.
You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words. Write the words that fit into the gap on the answer sheet.

Question Type 4 – Form/note/table/flow chart/summary completion

What's involved? In this type of question, you have to fill in gaps in an outline of part or all of the recording. The outline will focus on the main ideas/facts in the recording and may be:
  • - a form: often used for facts, such as names
  • - a set of notes: used to summarise information and show how different points relate to one another
  • - a table: used to summarise information that can be
  • divided into clear categories, e.g. place/time/price
  • - a flow chart: used to summarise the stages in a process, with the direction of the process shown by arrows.
You may have to:
  • - select your answers from a list on the question paper, then write the correct letter on the answer sheet
  • - select words from the recording which fit into gaps on the question paper. In this case, you will need to keep to the word limit given in the instructions. You do not have to change the words in the recording in any way.
You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single word. Write the words that fit into the gap on the answer sheet.

Question Type 5 – Sentence completion

What's involved? In this type of question, you have to read sentences that summarise important information from either all of the listening text or from one part of it. You have to fill in a gap in each sentence using information from the recording.

You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words. Write the words that fit into the gap on the answer sheet.

Question Type 6 – Short-answer questions

What's involved? In this type of question, you have to read a question and write a short answer using information from the recording. You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words. Write your answer on the answer sheet. Sometimes you are given a question which asks you to write two or three different answers.

What’s in the IELTS Academic Reading test?

There are three reading texts with a variety of question types.

Texts come from books, journals, magazines, newspapers and online resources, written for a non-specialist audience. All the topics are of general interest to students at undergraduate or postgraduate level. The texts may be written in different styles, for example, narrative, descriptive or discursive/argumentative. At least one text contains detailed logical argument. Texts may also contain diagrams, graphs or illustrations. If texts use technical vocabulary, then a simple dictionary definition is provided.

Summary

Time allowed: 60 minutes (including transfer time)
Number of sections: 3; the total text length is 2,150–2,750 words
Number of questions: 40
Marking: Each correct answer receives 1 mark.

Types of question

Question Type 1 – Multiple choice

What's involved? This type of question may be a question with four possible answers or the first half of a sentence with four possible sentence endings. You have to choose one correct answer (A, B, C or D), then write the correct answer on the answer sheet.

Sometimes you are given a longer list of possible answers and you have to choose more than one answer. You should read the question carefully to check how many answers you need to choose.

The questions are in the same order as the information in the text: that is, the answer to the first question will be before the answer to the second question, and so on.

Question Type 2 – Identifying information (True/False/Not given)

What's involved? In this type of question, you are given a number of statements and are asked: ‘Do the following statements agree with the information in the text?’ You have to write ‘True’, ‘False’ or ‘Not given’ in the boxes on your answer sheet. It is important to understand the difference between ‘False’ and ‘Not given’. ‘False’ means that the statement contradicts the information in the text. ‘Not given’ means that the statement neither agrees with nor contradicts the information in the text. You must be careful not to use any information you already know about the topic of the text when choosing your answer.

Question Type 3 – Identifying writer’s views/claims (Yes/No/Not given)

What's involved? In this type of question, you are given a number of statements and asked: ‘Do the following statements agree with the views of the writer?’ or ‘Do the following statements agree with the claims of the writer?’ You have to write ‘Yes’, ‘No’ or ‘Not given’ in the boxes on your answer sheet. It is important to understand the difference between ‘no’ and ‘not given’. ‘No’ means that the statement contradicts the writer’s view or claim. ‘Not given’ means that the statement neither agrees with nor contradicts the writer’s view or claim. You must be careful not to use any information you already know about the topic of the text when choosing your answer.

Question Type 4 – Matching information

What's involved? In this type of question, you have to find specific information in the paragraphs (or sections) of a text. The paragraphs (or sections) are identified by letters (A, B, C, etc.). You will need to write the letters of the correct paragraphs (or sections) in the boxes on your answer sheet. Not every paragraph (or section) may be used and some paragraphs (or sections) may be used more than once. When the paragraphs (or sections) may be used more than once, the instructions will say: ‘You may use any letter more than once’.

Question Type 5 – Matching headings

What's involved? In this type of question, there is a list of headings which are identified by Roman numerals (i, ii, iii, etc.). A heading summarises the main idea of a paragraph or section of the text. You must match the heading to the correct paragraph or section. The paragraphs (or sections) are identified by letters (A, B, C, etc.). You will need to write the correct Roman numerals in the boxes on your answer sheet. There will always be more headings than paragraphs or sections, so some headings will not be used. It is also possible that some paragraphs or sections may not be included in the task. One or more paragraphs or sections may already be matched with a heading as an example on the question paper. No heading may be used more than once.

Question Type 6 – Matching features

What's involved? In this type of question, you have to match a set of statements or pieces of information to a list of options. The options are a group of features from the text, and letters (A, B, C, etc.) are used to identify them. Write the correct letter on the answer sheet. You may, for example, have to match descriptions of inventions to the people who invented them. It is possible that some options will not be used, and that others may be used more than once. When it is possible to use any option more than once, the instructions will say: ‘You may use any option more than once’.

Question Type 7 – Matching sentence endings

What's involved? In this type of question, you are given the first half of a sentence based on information in the text and you have to choose the best way to complete the sentence by choosing from a list of possible endings. The endings are identified by letters (A, B, C, etc.). There will be more sentence endings than beginnings, so you will not use all of them. You must write the letter you choose on the answer sheet. The sentence beginnings are in the same order as the information in the text.

Question Type 8 – Sentence completion

What's involved? In this type of question, you have to fill in a gap in each sentence by choosing words from the text. You must write the words you choose on the answer sheet.

You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words. The questions are in the same order as the information in the text.

Question Type 9 – Summary/note/table/flow chart completion

What's involved? What's involved? In this type of question, you are given a summary of a part of the text, and have to complete it using words taken from the text. Note that the summary is not normally of the whole text. The summary may be in the form of:
  • a continuous text (called ‘a summary’ in the instructions)
  • several notes (called ‘notes’ in the instructions)
  • a table with some parts of it left empty or partially empty (called ‘a table’ in the instructions)
  • a series of boxes or steps linked by arrows to show the order of events, with some of the boxes or steps empty or partially empty (called ‘a flow chart’ in the instructions).
  • The answers may not come in the same order as in the text. However, they will usually come from one part of the text rather than the whole text. 
 There are two variations of this task type. In the first variation, you need to select words from the text which fit into gaps on the question paper. You must write the words you choose on the answer sheet. You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words.

    In the second variation, you have to choose from a list of words to fill the gaps. The words are identified by letters (A, B, C, etc.). You must write the letter you choose on the answer sheet.

    Question Type 10 – Diagram label completion

    What's involved? In this type of question, you have to complete the labels on a diagram. The diagram is based on a description given in the text. The diagram may be a type of machine, part of a building or of other information in the text that can be shown through pictures. Write the words that fit into the gap on the answer sheet.

    You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words.

    The answers may not come in the same order as in the text. However, they will usually come from one part of the text rather than the whole text.

    Question Type 11 – Short-answer questions

    What's involved? In this type of question, you have to answer questions about factual details in the text. You must write your answers in words or numbers on the answer sheet.

    Answers must be taken from words in the text. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Numbers can be written using figures (1, 2, etc.) or words (one, two, etc.). Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words. The answers come in the same order as the information in the text.

    What’s in the IELTS General Training Reading test?

    There are three sections of increasing difficulty. Section 1 may contain two or three short texts or several shorter texts. Section 2 contains two texts. In Section 3, there is one long text.

    The texts in Section 1 deal with everyday topics, and they are the sort of texts that a person would need to be able to understand when living in an English-speaking country. You will need to pick out important information, e.g. from notices, advertisements and timetables. The texts in Section 2 focus on work topics, for example, job descriptions, contracts, staff development and training materials. The text in Section 3 deals with a topic of general interest. The style of writing in Section 3 is generally descriptive (containing detailed information) and instructive (telling you how to do something). This Section 3 text is longer and more complex than the texts in Sections 1 and 2. Section 3 texts are taken from newspapers, magazines, books and online resources.

    You will need to transfer your answers to an answer sheet. You must transfer your answers during the hour you are given for the Reading test. Unlike the Listening test, no extra transfer time is given. You should be careful when writing your answers on the answer sheet because you will lose marks for incorrect spelling and grammar.

    Summary

    Time allowed: 60 minutes (including transfer time)
    Number of sections: 3; the total text length is 2,150–2,750 words
    Number of questions: 40
    Marking: Each correct answer receives 1 mark. Your final score is given as a band score from 1–9 in whole or half bands, e.g. 3, 8.5.

    Types of question

    Question Type 1 – Multiple choice

    What's involved? This type of question may be a question with four possible answers or the first half of a sentence with four possible sentence endings. You have to choose one correct answer (A, B, C or D), then write the correct answer on the answer sheet.

    Sometimes you are given a longer list of possible answers and you have to choose more than one answer. You should read the question carefully to check how many answers you need to choose.

    The questions are in the same order as the information in the text: that is, the answer to the first question will be before the answer to the second question, and so on.

    Question Type 2 – Identifying information (True/False/Not given)

    What's involved? In this type of question, you are given a number of statements and are asked: ‘Do the following statements agree with the information in the text?’ You have to write ‘True’, ‘False’ or ‘Not given’ in the boxes on your answer sheet. It is important to understand the difference between ‘False’ and ‘Not given’. ‘False’ means that the statement contradicts the information in the text. ‘Not given’ means that the statement neither agrees with nor contradicts the information in the text. You must be careful not to use any information you already know about the topic of the text when choosing your answer.

    Question Type 3 – Identifying writer’s views/claims (Yes/No/Not given)

    What's involved? In this type of question, you are given a number of statements and asked: ‘Do the following statements agree with the views of the writer?’ or ‘Do the following statements agree with the claims of the writer?’ You have to write ‘Yes’, ‘No’ or ‘Not given’ in the boxes on your answer sheet. It is important to understand the difference between ‘no’ and ‘not given’. ‘No’ means that the statement contradicts the writer’s view or claim. ‘Not given’ means that the statement neither agrees with nor contradicts the writer’s view or claim. You must be careful not to use any information you already know about the topic of the text when choosing your answer.

    Question Type 4 – Matching information

    What's involved? In this type of question, you have to find specific information in the paragraphs (or sections) of a text. The paragraphs (or sections) are identified by letters (A, B, C, etc.). You will need to write the letters of the correct paragraphs (or sections) in the boxes on your answer sheet. Not every paragraph (or section) may be used and some paragraphs (or sections) may be used more than once. When the paragraphs (or sections) may be used more than once, the instructions will say: ‘You may use any letter more than once’.

    Question Type 5 – Matching headings

    What's involved? In this type of question, there is a list of headings which are identified by Roman numerals (i, ii, iii, etc.). A heading summarises the main idea of a paragraph or section of the text. You must match the heading to the correct paragraph or section. The paragraphs (or sections) are identified by letters (A, B, C, etc.). You will need to write the correct Roman numerals in the boxes on your answer sheet. There will always be more headings than paragraphs or sections, so some headings will not be used. It is also possible that some paragraphs or sections may not be included in the task. One or more paragraphs or sections may already be matched with a heading as an example on the question paper. No heading may be used more than once.

    Question Type 6 – Matching features

    What's involved? What's involved? In this type of question, you have to match a set of statements or pieces of information to a list of options. The options are a group of features from the text, and letters (A, B, C, etc.) are used to identify them. Write the correct letter on the answer sheet. You may, for example, have to match descriptions of inventions to the people who invented them. It is possible that some options will not be used, and that others may be used more than once. When it is possible to use any option more than once, the instructions will say: ‘You may use any option more than once’.

    Question Type 7 – Matching sentence endings

    What's involved? In this type of question, you are given the first half of a sentence based on information in the text and you have to choose the best way to complete the sentence by choosing from a list of possible endings. The endings are identified by letters (A, B, C, etc.). There will be more sentence endings than beginnings, so you will not use all of them. You must write the letter you choose on the answer sheet. The sentence beginnings are in the same order as the information in the text.

    Question Type 8 – Sentence completion

    What's involved? In this type of question, you have to fill in a gap in each sentence by choosing words from the text. You must write the words you choose on the answer sheet.

    You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words.

    The questions are in the same order as the information in the text.

    Question Type 9 – Summary/note/table/flow chart completion

    What's involved? What's involved? In this type of question, you are given a summary of a part of the text, and have to complete it using words taken from the text. Note that the summary is not normally of the whole text. The summary may be in the form of:
    • a continuous text (called ‘a summary’ in the instructions) several notes (called ‘notes’ in the instructions)
    • a table with some parts of it left empty or partially empty (called ‘a table’ in the instructions)
    • a series of boxes or steps linked by arrows to show the order of events, with some of the boxes or steps empty or partially empty (called ‘a flow chart’ in the instructions).
    The answers may not come in the same order as in the text. However, they will usually come from one part of the text rather than the whole text. 
 There are two variations of this task type. In the first variation, you need to select words from the text which fit into gaps on the question paper. You must write the words you choose on the answer sheet. 
 You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words.

    In the second variation, you have to choose from a list of words to fill the gaps. The words are identified by letters (A, B, C, etc.). You must write the letter you choose on the answer sheet.

    Question Type 9 – Summary/note/table/flow chart completion

    What's involved? In this type of question, you have to complete the labels on a diagram. The diagram is based on a description given in the text. The diagram may be a type of machine, part of a building or of other information in the text that can be shown through pictures. Write the words that fit into the gap on the answer sheet.

    You should read the instructions very carefully as the number of words or numbers you may use to fill the gaps can change. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words. The answers may not come in the same order as in the text. However, they will usually come from one part of the text rather than the whole text.

    QuestionType 11 – Short-answer questions

    What's involved? What's involved? In this type of question, you have to answer questions about factual details in the text. You must write your answers in words or numbers on the answer sheet.

    Answers must be taken from words in the text. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. You will lose the mark for writing more than the word limit. Numbers can be written using figures (1, 2, etc.) or words (one, two, etc.). Contracted words such as ‘they’re’ will not be tested. Hyphenated words such as ‘check-in’ count as single words. The answers come in the same order as the information in the text.

    What’s in the IELTS Academic Writing test?

    There are two Writing tasks and BOTH must be completed.

    In Task 1, you have to describe some visual information in your own words (a graph, table, chart or diagram). You need to write at least 150 words in about 20 minutes.

    In Task 2, you are given a point of view, argument or problem which you need to discuss. You need to write at least 250 words in about 40 minutes.

    You must write your answers using full sentences. You must not write your answers as notes or bullet points. You must write your answers on the answer sheet. You are allowed to write notes on the question paper, but these will not be seen by the examiner.

    Marking

    Certificated IELTS examiners assess your performance on each Writing task. There are four assessment criteria (things which the examiner thinks about when deciding what score to give you):

    • - Task achievement/response
    • - Coherence and cohesion
    • - Lexical resource
    • - Grammatical range and accuracy.

    Task achievement (in Task 1) and Task response (in Task 2) assesses how accurately, appropriately and relevantly your response covers the task requirements, using the minimum of 150 words for Task 1 and 250 words for Task 2.

    In Task 1, all the information you require is given in the diagram. In Task 2, Task response includes how well you develop your argument in response to the task, giving evidence and examples which may be from your own experience.

    Coherence and cohesion assesses how clear and fluent your writing is, and how you organise ideas and information. It includes giving your ideas in a logical order, and using a range of cohesive devices (for example, linking words, pronouns and conjunctions, etc.) appropriately.

    Lexical resource assesses the range of vocabulary you have used, and how accurately and appropriately you use it.

    Grammatical range and accuracy assesses the range of grammar you have used and how accurately and appropriately you have used it.

    Summary

    Time allowed: 60 minutes
    Number of tasks: 2
    Marking: Task 2 contributes twice as much as Task 1 to the Writing score.

    Tasks 1 and 2

    Academic Writing – Task 1

    What's involved? In Academic Writing Task 1, you may be asked to describe:
    • one or more graphs, charts or tables
    • a diagram of an object, device, process or event. You have to include the most important points in the diagram. Some minor points or details may be left out.
    You should write in an academic or semi-formal/neutral style. You should spend no more than 20 minutes on this task. You must write at least 150 words and will be penalised if your answer is too short. While you will not be penalised for writing more than 150 words, you should remember that a longer Task 1 answer may mean that you have less time to spend on Task 2, which contributes twice as much to your Writing band score. You should remember that you will be penalised if what you write does not relate to the topic. You will also be penalised if your answer is not written as a whole piece of connected text (i.e. you must not use notes or bullet points). You will be severely penalised if your writing is plagiarised (i.e. copied from another source). You must write your answer on the answer sheet.

    Academic Writing – Task 2

    What's involved? In Academic Writing Task 2, you are given a topic to write about. Your answer should discuss the most relevant issues. You must read the task carefully so that you can write a full answer that is relevant. For example, if the topic is a particular aspect of the wider topic of computers, you should focus on this aspect only in your answer. You should not simply write about computers in general.

    You should write in an academic or semi-formal/neutral style. You will need to organise your ideas clearly and make sure you use relevant examples (which can be from your own experience, if relevant) or evidence.

    You should spend no more than 40 minutes on this task. You must write at least 250 words and will be penalised if your answer is too short. While you will not be penalised for writing more than 250 words, if you write a very long answer you may not have time for checking and correcting at the end, and some ideas may not be directly relevant to the question. You may also produce handwriting which is unclear.

    You should remember that you will be penalised if what you write is not related to the topic. You will also be penalised if your answer is not written as a whole piece of connected text (i.e. you must not use notes or bullet points). You will be severely penalised if your writing is plagiarised (i.e. copied from another source). You must write your answer on the answer sheet.

    What’s in the IELTS General Training Writing test?

    There are two Writing tasks and BOTH must be completed

    In Task 1, you have to respond to a situation by writing a letter, for example, asking for information or explaining a situation. You need to write at least 150 words in about 20 minutes.

    In Task 2, you are given a point of view, argument or problem which you need to discuss. You need to write at least 250 words in about 40 minutes.

    You must write your answers using full sentences. You must not write your answers as notes or bullet points. You must write your answers on the answer sheet. You are allowed to write notes on the question paper but these will not be seen by the examiner.

    Marking

    Certificated IELTS examiners assess your performance on each Writing task. There are four assessment criteria (things which the examiner thinks about when deciding what score to give you):

    • - Task achievement/response
    • - Coherence and cohesion
    • - Lexical resource
    • - Grammatical range and accuracy.

    Task achievement (in Task 1) and Task response (in Task 2) assesses how accurately, appropriately and relevantly your response covers the task requirements, using the minimum of 150 words for Task 1 and 250 words for Task 2. In Task 1, Task achievement refers to how well your letter achieves its purpose.

    In Task 2, Task response includes how well you develop your argument in response to the task, giving evidence and examples which may be from your own experience.

    Coherence and cohesion assesses how clear and fluent your writing is, and how you organise ideas and information. It includes giving your ideas in a logical order, and using a range of cohesive devices (for example, linking words, pronouns and conjunctions, etc.) appropriately.

    Lexical resource assesses the range of vocabulary you have used, and how accurately and appropriately you use it.

    Grammatical range and accuracy assesses the range of grammar you have used and how accurately and appropriately you have used it.

    Summary

    Time allowed: 60 minutes
    Number of tasks: 2
    Marking: Task 2 contributes twice as much as Task 1 to the Writing score.

    Tasks 1 and 2

    General Training Writing – Task 1

    What's involved? In General Training Writing Task 1, you are given a situation and you need to write a response of at least 150 words in the form of a letter. Depending on the task, the letter may be personal, semi-formal or formal in style. The question paper tells you what information to include in the form of three bullet points. You might need to ask for or give information and/or explain a situation. The situations you need to write about are common, everyday situations such as:
    • writing to a college accommodation officer about problems with your accommodation
    • writing to a new employer about problems you are having with managing your time
    • writing to a local newspaper about a plan to develop a local airport
    • writing to a renting agency to sort out problems with the heating system in your house.
    The style of writing that you use depends on who you are asked to write to and how well you are supposed to know them. You need to choose a style that is appropriate for your audience and will help you achieve your purpose for writing, e.g. writing to a friend (personal) or writing to a manager (semi-formal or formal). You should spend no more than 20 minutes on this task. You need to write at least 150 words and will be penalised if your answer is too short. While candidates will not be penalised for writing more than 150 words, you should remember that a longer Task 1 answer may mean that you have less time to spend on Task 2, which contributes twice as much to your Writing band score. You should remember that you will be penalised if what you write is not related to the topic. You will also be penalised if your answer is not written as a whole piece of connected text (i.e. you must not use notes or bullet points). You will be severely penalised if your writing is plagiarised (i.e. copied from another source). You do not need to write any addresses at the top of your letter. You must write your answer on the answer sheet.

    General Training Writing – Task 2

    What's involved? In General Training Writing Task 2, you need to write a semi-formal/neutral discursive essay of a minimum of 250 words. The instructions for Task 2 give information about an opinion, argument or problem. The instructions then tell you what you should discuss in your essay. You will need to write about a topic of general interest, such as:
    • whether children’s leisure activities should be educational
    • how environmental problems can be solved
    • whether smoking should be banned in public places.
    You should make sure that you write your answer carefully so that you give a complete response that is also relevant. To do this you will need to organise your ideas clearly and make sure you use relevant examples (which can be from your own experience, if relevant) or evidence. For this task, you need to be able to discuss more abstract and complex ideas and use a variety of vocabulary and grammatical structures.

    You should spend no more than 40 minutes on this task. You must write at least 250 words and will be penalised if your answer is too short. While you will not be penalised for writing more than 250 words, if you write a very long answer you may not have time for checking and correcting at the end, and some ideas may not be directly relevant to the question. You may also produce handwriting which is unclear.

    You should remember that you will be penalised if what you write is not related to the topic. You will also be penalised if your answer is not written as a whole piece of connected text (i.e. you must not use notes or bullet points). You will be severely penalised if your writing is plagiarised (i.e. copied from another source). You must write your answer on the answer sheet.

    What’s in the IELTS Speaking test?

    The Speaking test is a face-to-face interview between the candidate and an examiner. The Speaking test is recorded. There are three parts to the test, and each part follows a specific pattern of tasks in order to test your speaking ability in different ways.

    Marking

    Certificated IELTS examiners assess your speaking performance throughout the test. There are four assessment criteria (things which the examiner thinks about when deciding what score to give you):

    • - Fluency and coherence
    • - Lexical resource
    • - Grammatical range and accuracy
    • - Pronunciation.

    Fluency and coherence assesses how well you can speak at a normal speed without too much hesitation. It also includes putting your sentences and ideas in a logical order and using cohesive devices (including linking words, pronouns and conjunctions, etc.) appropriately so that what you say is not difficult to follow.

    Lexical resource assesses the range of vocabulary you use and how accurately and appropriately you use vocabulary to express meaning. It also includes the ability to express yourself using alternative vocabulary when you don’t know a particular word.

    Grammatical range and accuracy assesses the range of grammar you use and how accurately and appropriately you use it.

    Pronunciation assesses your ability to speak in a way which can be understood without too much effort.

    Summary

    Time allowed: 11–14 minutes
    Number of parts: 3

    Parts 1–3

    Part 1 – Introduction and interview

    What's involved? In this part, the examiner introduces him/herself and checks your identity. Then the examiner asks you general questions on some familiar topics, such as home, family, work, studies or interests. Part 1 is 4–5 minutes long.

    Part 2 – Long turn

    What's involved? Part 2 is the individual long turn. The examiner gives you a task card which asks you to talk about a particular topic. The card tells you what points you should include in your talk and instructs you to explain one aspect of the topic. You have one minute to prepare your talk, and the examiner will give you a pencil and paper to make notes.

    By using the points on the task card and making notes during the preparation time, you should be able to think of appropriate things to say, and have time to structure your talk so that you keep talking for 2 minutes.

    The examiner will then ask you to begin talking and will stop you when the time is up. They may then ask you one or two questions on the same topic. Part 2 lasts 3–4 minutes, including the preparation time.

    Part 2 – Long turn

    What's involved? In Part 3, you and the examiner discuss issues related to the topic in Part 2 in a more general and abstract way and, where appropriate, in greater depth. Part 3 lasts 4–5 minutes.

    Types of questions

    Find out more about what to expect in the IELTS Listening, Reading, Writing and Speaking tests from us, IELC. Understand the question and task types in each section of the test.

    Band Score

    Band Score – Academic

    Numbering Score
    4-5 2.5
    6-7 3.0
    8-9 3.5
    10-12 4.0
    13-14 4.5
    15-18 5.0
    19-22 5.5
    19-22 5.5
    23-26 6.0
    27-29 6.5
    30-32 7.0
    33-34 7.5
    35-36 8.0
    37-38 8.5
    39-40 9.0

    Band Score – General Training Reading

    Numbering Score
    6-8 2.5
    9-11 3.0
    12-14 3.5
    19-22 4.5
    23-26 5.0
    27-29 5.5
    30-31 6.0
    32-33 6.5
    34-35 7.0
    36 7.5
    37-38 8.0
    39 8.5
    40 9.0

    Academic or General Training?

    IELTS Academic measures the English language proficiency needed for an academic, higher education environment. IELTS General Training measures English language proficiency in a practical, everyday context. This version of the test is also often a visa requirement for those planning to migrate to English speaking countries including Australia, the UK, and New Zealand.

    A reliable, secure test

    The IELTS nine (9) band score system grades scores consistently. It is secure, benchmarked and understood worldwide. Test materials are designed carefully so that every version of the test is of a comparable level of difficulty.

    Where to register?

    As we are the official registration point of Chittagong British Council, you can register for your IELTS from here.

    Course Outlines

    IELTS free Orientation Class is available on request.

    Crash Programme Regular Programme
    IELTS in Just 26/36 Days +2 Review Classes 3 Months
    2.5/1.5 hours of Class Duration. 1.5 hours of Class Duration.
    Everyday Class (Except Friday) 3 days a week
    65 hours of class preparation & Practice 54 hours of class preparation & Practice
    40 Exclusive Mock Test 40 Exclusive Mock Test

    FAQ

    Where can candidates sit an IELTS test?

    IELTS has more than 1,000 test centres and locations in over 140 countries around the world. In Chittagong, candidates can sit for IELTS test in Chittagong British Council.

    What is the test format?

    The test has four components – Listening, Reading, Writing and Speaking. Candidates must sit all four components to receive a test result.

    What is the difference between an Academic and a General Training test?

    There is a choice between the Academic and the General Training test in the Reading and Writing components.

    • IELTS Academic assesses whether a candidate is ready to study or train in English at an undergraduate or postgraduate level. Admission to undergraduate and postgraduate courses is based on the results of these modules.
    • IELTS General Training measures English language proficiency in a practical, everyday context. The tasks and texts reflect both workplace and social situations. General Training is suitable for candidates who plan to complete their secondary education in an English-speaking country, undertake work experience or training programs. This version of the test is also part of the migration process for candidates who are planning to migrate to Australia, Canada and New Zealand.

    How is the test administered?

    Every aspect of the test is subject to the highest quality controls, security procedures and integrity management practices. All test centres follow the same code of practice and IELTS protocols.

    Who owns IELTS?

    IELTS is jointly owned by the British Council, IDP: IELTS Australia and Cambridge English Language Assessment

    How is the IELTS test marked?

    IELTS uses a unique 9-point scoring system to measure and report test scores in a consistent manner. Candidates receive scores for each language skill (listening, reading, writing and speaking) and an overall band score.

    When do candidates receive their test scores?

    Candidates' Test Report Form is posted to them 13 calendar days after the test date.

    For how long is an IELTS test score valid?

    IELTS scores have a recommended two year validity period.

    How can I verify the test results a candidate supplies me?

    The TRF Verification Service gives institutions access to a secure database through which candidates’ results can be checked for authenticity. The TRF Verification Service is designed to provide yet another safeguard to supplement the sophisticated features built into the IELTS Test Report Form.

    Which countries recognise IELTS?

    IELTS is recognised in over 145 countries by more than 9,000 institutions, government departments, professional associations and other organisations. IELTS is the only internationally owned and globally recognised assessment of English language proficiency.

    Which institutions use IELTS?

    More than 8,000 institutions, government agencies, professional associations and other organisations use IELTS for their English language requirements.